Bike Chains

Introducing our Shimano IG-HG51 replacement chain Specification 6/7/8 Speed Compatible Suitable for all Index systems up to 8 speed1/2”x3/32” - 116 LinksPin Length - 7.1mmPin strength - 150kgfTensile strength - Minimum 860kgfWeight - 320gIG/HG/Shimano/Sram CompatibleUniversal for 6/7/8 SpeedChrome Plate/ Anti Rust resistance.Lower noise at engagement.   Installation INSTALLATION TOOLS REQUIRED : Chain Rivet ExtractorPlease ensure your bicycle has been cleaned and inspected before installation.We strongly advise this is completed in a well lit/clean area and you have the suitable tools and eye protection to hand! If in any doubt please seek the assistance of a qualified Technician/ Engineer). Installation instructions;First, lubricate the sealing rings with the grease then push two rings onto the two pins of the link. Now lubricate the back of the chain plates and push the grease into the chain roller holes. Then push the link through from the back of the chain and try to push back as much grease as you possibly can! The more grease the better!Secondly, put the last two rings onto the front of the link around the side plates and align correctly. All that grease will help to hold them in position. Now we need to press on the outside plate correctly. To do this you will require a suitable tool. The idea is to press on the plate in exactly the same position as all the other chain links so that it is aligned with the width perfectly. Certain chain tools provide you with spacer blocks, this is to help you do this without over- tightening. That being said if you don’t have one of these then just take your time and be careful. From here measure the width of the other chain links to the outside of the two side plates. Make sure this is the plates and NOT the pins. Carefully push on your rivet link plate until the rivet link width is aligned with the other chain links. Please be careful and patient with your measuring to make sure you don’t over tighten it.Finally we just need to rivet the pin. Our solid pin design needs to be rivetedover with a suitable tool to replicate the riveting on all the other pins. Nevertheless, simply remember that you don’t need to over do this. The riveting is there to make sure the plate can’t come off, but there is no force pushing the plate off unless something is not aligned correctly. That’s it! You’re on. Your new installed riveted joining link should be aligned and the same width and it should be able to move as freely as all the other links. Please be aware that it should not be tight or binding. If it is, then you have gone wrong somewhere on the installation . If this is the case you’ll need to buy a new link and start again. If you are in any doubt or have any problem with installation then consult a qualified technician/Engineer

KMC 11 Speed Chain 116 links Nickle Plated100% Genuine 2022 KMC Chains - Superior Nickle Plated   Eco-proteq (epT) anti-rust technology, surpasses 650 hours salt spray test Double X durability, unmatched chain life - KMC guaranties your satisfaction X-bridge technology provides phenomenal shifting performance with a uniquely designed outer plate configured with asymmetrical chamfering for quicker and smoother gear shifting and quieter riding.   Non-directional design: assembly of this chain is independent of direction. It allows maximum compatibility, no matter MTB or race: this chain fits all Unique stretch-proof treatment, The durability has been effectively enhanced by reducing the attrition between inner plates and pin. As a result of this, chain life has been significantly improved.   Authenticated Production. Awarded Internationally & Industry Renowned KMC X11 Model: KMC Chain X11 Dimensions: 1/2" X 11/128" - pin length: 5.65 mm 118 links Weight: 266 grams

KMC 10 Speed Chain 116 links Nickle Plated100% Genuine 2022 KMC Chains - Superior Nickle Plated   Eco-proteq (epT) anti-rust technology, surpasses 650 hours salt spray test Double X durability, unmatched chain life - KMC guaranties your satisfaction X-bridge technology provides phenomenal shifting performance with a uniquely designed outer plate configured with asymmetrical chamfering for quicker and smoother gear shifting and quieter riding.   Non-directional design: assembly of this chain is independent of direction. It allows maximum compatibility, no matter MTB or race: this chain fits all Unique stretch-proof treatment, The durability has been effectively enhanced by reducing the attrition between inner plates and pin. As a result of this, chain life has been significantly improved.   Authenticated Production. Awarded Internationally & Industry Renowned KMC X10 Model: KMC Chain X10 Dimensions: 1/2"x 11/128" Link: 116 Links, Colour: Silver Black Weight: 273 grams Connector: Missing Link 10R / CL559R Reusable Compatibility: SHIMANO, Campagnolo, SRAM and other 10 speed drivetrains

Universal Compatibility: Mountain Biking, XC, Off Road, Cross Country Riding etc (please see below for further detail).    Installation and Compatibility:  This chainring fit for 8/9/10/11 speed bikes. Fit to our Air Bike Crank sets and also Shimano M370/M410/M610/M670/M780 cranks ( it does not fit M7000/M8000/9000).    Also fits SRAM/FSA/Prowheel 104BCD cranks.   Please make sure your crank BCD specification is 104mm BCD before purchasing. Bolts not included.   Chainring Description: Brand: Air Bike  Model: Narrow Wide  Size: 32T, 34T, 36T, 38T Material: Top quality 7075-T6 Aluminium alloy (lighter and more durable than others on this platform, checkout our weights!) Weight: 32T 45g, 34T 50g, 36T 55g, 38T 65g Compatibility: 8, 9, 10,11 Speeds Bolt Centre Diameter: 104mm BCD Thickness: 4mm Shape: Round/Oval

KMC 9 Speed Chain 116 links Nickle Plated100% Genuine 2022 KMC Chains - Superior Nickle Plated   One chain for all - Compatible with Shimano, Campagnolo and SRAM 9-speed derailleur systems. The X-Bridge is a new outer plate configured with precisely articulated angles for quicker and smoother gear shifting and quieter riding. Light weight shorter length pins combine with high-grade materials to reduce weight Unique stretch-proof treatment, The durability has been effectively enhanced by reducing the attrition between inner plates and pin. As a result of this, chain life has been significantly improved. Non-directional design: assembly of this chain is independent of direction. It allows maximum compatibility, no matter MTB or race: this chain fits all Hi-performance, extremely durable 1/2" X 11/128" Pin length: 6.6 mm Nickel coated Supplied with joining link Lightweight: 288 grams